Objective To review literatures about 3D printing model applied in clinical teaching based on the science mapping, so as to understand the literature characteristics, hotspots and progress to provide references for future research. Methods The relevant literatures were retrieved from the core collection of Web of Science and CNKI, Wangfang and VIPs and the science mapping was drawn by CiteSpace software and the analysis function of the CNKI web page. Results A total of 617 articles were reviewed, in which 395 were published in English and 302 in Chinese. The annual publication volume showed a gradual increasing in quantity. The journals with the highest volume of domestic and foreign journals were respectively China Continuing Medical Education and Chinese Medical Education Technology. In recent years, researches about 3D printing were focused on anatomy education, surgical simulation and orthopedic teaching. Conclusions The 3D printing model applied in clinical teaching had gradually attracted the attention of clinicians. However, the coverage of relevant research in China was limited. There are still some problems and limitations in the application of 3D printing model in clinical teaching.
Zhou Qian
,
Wei Tao
,
Hu Ziyi
,
Gou Juxiang
. Knowledge graph analysis of 3D printing model in clinical teaching at home and abroad[J]. Chinese Journal of Medical Education, 2021
, 41(1)
: 40
-43
.
DOI: 10.3760/cma.j.cn115259-20200721-01092
[1] Rengier F, Mehndiratta A, von Tengg-Kobligk H, et al. 3D printing based on imaging data: review of medical applications[J]. Int J Comput Assist Radiol Surg, 2010,5(4):335-341. DOI: 10.1007/s11548-010-0476-x.
[2]Chen C, Song M. Visualizing a field of research: a methodology of systematic scientometric reviews[J]. PLoS One, 2019,14(10):e0223994. DOI: 10.1371/journal.pone.0223994.
[3]Chen C. CiteSpace: a practical guide for mapping scientific literature[M]. New York:Nova Science Publisher, 2016: 169.
[4]陈燕和.中国的3D打印研究(1993-2014)——基于文献计量学的分析[J].现代情报,2015,35(6):86-89. DOI: 10.3969/j.issn.1008-0821.2015.06.016.
[5]Hochman JB, Rhodes C, Kraut J, et al. Enduser comparison of anatomically matched 3-dimensional printed and virtual haptic temporal bone simulation: a pilot study[J].Otolaryngol Head Neck Surg,2015,153(2):263-268.DOI: 10.1177/0194599815586756.
[6]Wang Z, Liu Y, Luo H, et al. Is athree-dimensional printing model better than a traditional cardiac model for medical education? A pilot randomized controlled study[J]. Acta Cardiol Sin, 2017,33(6):664-669. DOI: 10.6515/ACS20170621A.
[7]Nesic D, Schaefer BM, Sun Y, et al. 3D printing approach in dentistry: the future for personalized oral soft tissue regeneration[J].J Clin Med,2020,9(7):2238.DOI: 10.3390/jcm9072238.
[8]Randazzo M, Pisapia JM, Singh N, et al. 3D printing in neurosurgery:a systematic review[J].Surg Neurol Int,2016,7(Suppl 33):S801-S809.DOI: 10.4103/2152-7806.194059.
[9]Levesque JN, Shah A, Ekhtiari S, et al. Three-dimensional printing in orthopaedic surgery: a scoping review[J]. EFORT Open Rev, 2020,5(7):430-441. DOI: 10.1302/2058-5241.5.190024.
[10]Hermsen JL, Burke TM, Seslar SP, et al. Scan, plan, print, practice, perform: development and use of a patient-specific 3-dimensional printed model in adult cardiac surgery[J].J Thorac Cardiovasc Surg,2017,153(1):132-140.DOI: 10.1016/j.jtcvs.2016.08.007.
[11]McMenamin PG, Quayle MR, McHenry CR, et al. The production of anatomical teaching resources using three-dimensional(3D) printing technology[J]. Anat Sci Educ, 2014,7(6):479-486. DOI: 10.1002/ase.1475.
[12]Su W, Xiao Y, He S, et al. Three-dimensional printing models in congenital heart disease education for medical students: a controlled comparative study[J]. BMC Med Educ, 2018,18(1):178. DOI: 10.1186/s12909-018-1293-0.
[13]Biglino G, Milano EG, Capelli C, et al. Three-dimensional printing in congenital heart disease: considerations on training and clinical implementation from a teaching session[J].Int J Artif Organs,2019,42(10):595-599. DOI: 10.1177/0391398819849074.
[14]李忠海, 唐家广, 王华东, 等. 3D 打印技术在骨科临床教学中的应用初探[J].中国医学教育技术,2016,30(2):198-200.DOI: 10.13566/j.cnki.cmet.cn61-1317/g4.201602024.
[15]Torres IO, De Luccia N. A simulator for training in endovascular aneurysm repair: The use of three dimensional printers[J].Eur J Vasc Endovasc Surg, 2017,54(2):247-253. DOI: 10.1016/j.ejvs.2017.05.011.
[16]陈熹阳, 赵纪春, 黄斌, 等. 3D打印主动脉夹层模型在血管外科住院医生教学中的应用[J].中国血管外科杂志(电子版),2020,12(2):150-153. DOI: 10.3969/j.issn.1674-7429.2020.02.016.
[17]万昌丽, 李晓林, 丁小萍, 等. 3D打印技术结合PBL与CBL教学法在骨科低年资护士专科能力培养中的应用[J].护士进修杂志,2019,34(8):756-759. DOI: 10.16821/j.cnki.hsjx.2019.08.026.
[18]李学新, 赵惠香, 姜玉荣, 等. 3D打印技术在神经外科护理带教中的应用效果[J].中华现代护理杂志,2017,23(2):252-255.DOI: 10.3760/cma.j.issn.1674-2907.2017.02.028.
